Enterprise AV™ over IP Encoder, 4K, 2 PoE ports LAN Switch, HDMI Pass-through, Audio In, Audio De-Embedding with Lip-Sync & DSP, KVM/USB
Enterprise AV™ over IP Solutions Key Digital’s Enterprise AV™ over IP Encoders and Decoders create expandable HDMI over IP systems that can be scaled to fit any commercial installation.
System Configuration PC Software - Key Digital® Management Software Pro (KDMS™ Pro) • Configure units, build virtual matrix systems, add video walls, and manage video routing
KD-IP922ENC/DEC Usage Modes • Video Wall Controller • Digital Video Matrix • Digital Video Distribution System • Digital Video Switcher • Digital Video Extender • Master Controller • KVM Matrix
Features • Enterprise AV Over IP: Utilizes a managed gigabit network switch to enable video distribution, matrix switching, and extension • Video Wall Processing: Encoder + Decoder systems create video walls with up to 8V and 8H monitors • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant • 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit • 4K Down-scale: Incoming 4K resolution can be down-converted to 1080p or 720p at each decoder, enabling monitors to display content at optimal resolution at all times • Signal Extension: Up to 330 ft. / 100 m @ 4K 24/25/30(4:4:4)/60(4:2:0) into network switch or or point-to-point • Power over Ethernet: Does not require power supply when integrated with compatible PoE network switch • Dual LAN: Enable system expansion beyond a 48 port system • Redundant Power Supply: Added reliability for non-PoE integration • Audio De-Embedding: Audio from the HDMI input is de-embedded through Analog L/R Balanced/Unbalanced phoenix terminal to enable external audio connectivity with audio distribution systems and amplifiers • Audio DSP: Volume, muting, 3-band EQ, and lip-sync delay controllable on audio de-embed port • HDMI Pass-Through: Enables connection to local monitor or additional devices up to 75 ft. • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60 f/s • Control: 3 multi-function ports controllable via KeyCode open API, as Compass Control® Pro master controller, or as control extension via IP • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected to Decoder • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control • USB 2.0: Supports synchronous and isochronous connections • IR Sensor: Sensor powering via +5V IR In port collects line-of-sight IR from remote(s) without external IR connecting block • Up/Down IR: Two channels of IR enable control to/from devices connected to Encoder and Decoder units • RS-232: Bi-Directional control to/from Encoder and Decoder unit on Phoenix connector • RS-232/TCP-IP Control Mode: Provides control of unit as well as connectivity status • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™ • Required Network Cabling: CAT6 UTP/STP, CAT6A, CAT7. Shielded cabling requires shielded RJ45 connectors on both ends. • Control System Support: Controllable by all IR, RS-232 & TCP/IP supported control systems via open API: Compass Control® Pro, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc. • Key Digital® App Ready: Can be controlled over TCP/IP via Key Digital® iOS App • I2C Communication: EDID and HDCP authentication to Display and Source • Data Stream Bandwidth: <900Mbps • Latency: <40ms at 4K. Less at lower resolution.